Corporate News

Why is wall-hung boiler not hot?

Some people report that the wall-mounted boiler heating is not started or not hot, which may be caused by the following reasons.

Whether the thermostat knob on the control panel of wall-hung boiler is turned on.

Whether the wall-mounted boiler is connected with the temperature controller. If the temperature controller is connected, the temperature controller must be opened.

Poor system circulation causes the wall-mounted boiler to burn and stop, and enters the short cycle phase, finally resulting in poor heat dissipation effect.

Why is the gas consumption of wall-mounted boiler large?

We all hope to save costs and reduce gas consumption. What are the knowledge points on the gas consumption of wall-mounted boiler? Pay attention to the following points.

With the same heating furnace power and almost the same gas consumption, the gas consumption mainly depends on several factors:

(1) Insulation condition and orientation of rooms.

Poor indoor insulation. If the whole room is warm, the heating temperature must be increased. The power of the wall-mounted boiler must be increased, and the natural gas consumption must be increased. Therefore, before installing the wall-mounted boiler, the heat consumption of the room shall also be considered, and the room insulation shall be done well.

(2) Building Construction

The higher the building is, the bigger the heat dissipation space is. It is necessary to increase the temperature to meet the overall heating effect, increase the use power of the wall-mounted boiler, and increase the gas consumption of the wall-mounted boiler.

(3) Height of heating temperature

Setting too high or too low heating temperature will affect the air consumption of wall-mounted boiler. The editor of Chenhao Holding Warm reminds you that too high setting will waste resources, and too low setting will cause too low initial temperature and affect the gas consumption of wall-mounted boiler.

(4) Whether the wall-mounted boiler operates for the first time

During the initial operation, the wall-mounted boiler will operate at a large power line for a period of time, and the gas consumption will be a little more at the beginning. When the temperature rises and the boiler operates at a temperature, the gas consumption will be reduced compared with that before.